This is the latest recevied telemetry packets stored in our database for station/object KF7IQD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780177374 | 80 | 413 | 0 | 0 | 0 |
| 1780177255 | 80 | 414 | 0 | 0 | 0 |
| 1780177133 | 80 | 414 | 0 | 0 | 0 |
| 1780177013 | 80 | 413 | 0 | 0 | 0 |
| 1780176892 | 80 | 415 | 0 | 0 | 0 |
| 1780176772 | 80 | 413 | 0 | 0 | 0 |
| 1780176651 | 81 | 415 | 0 | 0 | 0 |
| 1780176531 | 81 | 414 | 0 | 0 | 0 |
| 1780176410 | 81 | 414 | 0 | 0 | 0 |
| 1780176290 | 81 | 415 | 0 | 0 | 0 |
| 1780176049 | 81 | 412 | 0 | 0 | 0 |
| 1780175929 | 81 | 413 | 0 | 0 | 0 |
| 1780175808 | 81 | 412 | 0 | 0 | 0 |
| 1780175688 | 81 | 410 | 0 | 0 | 0 |
| 1780175567 | 81 | 408 | 0 | 0 | 0 |
| 1780175447 | 82 | 408 | 0 | 0 | 0 |
| 1780175326 | 81 | 407 | 0 | 0 | 0 |
| 1780175206 | 82 | 406 | 0 | 0 | 0 |
| 1780175085 | 82 | 404 | 0 | 0 | 0 |
| 1780174965 | 82 | 403 | 0 | 0 | 0 |
| 1780174844 | 82 | 402 | 0 | 0 | 0 |
| 1780174724 | 82 | 401 | 0 | 0 | 0 |
| 1780174603 | 83 | 395 | 0 | 0 | 0 |
| 1780174483 | 83 | 394 | 0 | 0 | 0 |
| 1780174362 | 83 | 394 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)