This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780197898 | 115 Count | 912 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1780196698 | 114 Count | 911 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1780195497 | 113 Count | 910 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1780194296 | 112 Count | 909 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1780193095 | 111 Count | 908 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1780191895 | 110 Count | 907 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1780190706 | 109 Count | 906 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1780189505 | 108 Count | 905 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1780188305 | 107 Count | 904 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1780187104 | 106 Count | 904 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1780185903 | 105 Count | 903 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1780184702 | 104 Count | 902 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1780183502 | 103 Count | 901 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1780182301 | 102 Count | 895 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1780181100 | 101 Count | 894 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1780179900 | 100 Count | 893 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1780178699 | 99 Count | 892 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1780177498 | 98 Count | 891 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1780176297 | 97 Count | 890 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1780175097 | 96 Count | 889 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1780173896 | 95 Count | 888 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1780172695 | 94 Count | 887 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1780171494 | 93 Count | 886 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1780170294 | 92 Count | 885 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1780169125 | 91 Count | 884 Count | 0 Count | 4.25 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)