This is the latest recevied telemetry packets stored in our database for station/object DL1KDA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780186830 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780185030 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780183230 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780181430 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780179630 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780177830 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780176030 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780174230 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780172430 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780170629 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780168829 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780167029 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780165229 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780163429 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780161629 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780159829 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780158029 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780156229 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780154429 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780152629 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780150829 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780149029 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780147228 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780145428 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
| 1780143628 | 172 Count | 328 Count | 155 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)