This is the latest recevied telemetry packets stored in our database for station/object SQ9SXN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790322690 | 409 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790320890 | 407 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790319089 | 406 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790317288 | 404 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790315487 | 403 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790313687 | 401 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790311886 | 400 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790310085 | 398 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790308285 | 397 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790306484 | 395 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790304683 | 394 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790302882 | 392 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790301090 | 391 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790299289 | 389 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790297488 | 388 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790295687 | 385 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790293887 | 384 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790292086 | 382 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790290285 | 381 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790288484 | 379 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790286684 | 378 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790284883 | 376 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790283082 | 375 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790279495 | 372 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
| 1790277694 | 370 Count | 45 Count | 1 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)