This is the latest recevied telemetry packets stored in our database for station/object TI0ATI-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780159930 | 395 | 0 | 0 | 0 | 0 |
| 1780159030 | 394 | 0 | 0 | 0 | 0 |
| 1780158130 | 391 | 0 | 0 | 0 | 0 |
| 1780157229 | 396 | 0 | 0 | 0 | 0 |
| 1780156329 | 396 | 0 | 0 | 0 | 0 |
| 1780155429 | 392 | 0 | 0 | 0 | 0 |
| 1780154529 | 394 | 0 | 0 | 0 | 0 |
| 1780153629 | 387 | 0 | 0 | 0 | 0 |
| 1780152729 | 383 | 0 | 0 | 0 | 0 |
| 1780151829 | 388 | 0 | 0 | 0 | 0 |
| 1780150929 | 392 | 0 | 0 | 0 | 0 |
| 1780150029 | 391 | 0 | 0 | 0 | 0 |
| 1780149129 | 390 | 0 | 0 | 0 | 0 |
| 1780148229 | 397 | 0 | 0 | 0 | 0 |
| 1780147329 | 393 | 0 | 0 | 0 | 0 |
| 1780146429 | 392 | 0 | 0 | 0 | 0 |
| 1780145528 | 385 | 0 | 0 | 0 | 0 |
| 1780144628 | 380 | 0 | 0 | 0 | 0 |
| 1780143728 | 385 | 0 | 0 | 0 | 0 |
| 1780142828 | 385 | 0 | 0 | 0 | 0 |
| 1780141928 | 381 | 0 | 0 | 0 | 0 |
| 1780141028 | 386 | 0 | 0 | 0 | 0 |
| 1780140128 | 386 | 0 | 0 | 0 | 0 |
| 1780139229 | 386 | 0 | 0 | 0 | 0 |
| 1780138328 | 382 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)