PenangAPRS Track

My position About ☰

reset

IZ2XCK-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ2XCK-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1780195074	0 Pkt/10m	0 Pkt/10m	4.27 Volt	12.4 Volt	0.02 Ampere
1780193873	0 Pkt/10m	0 Pkt/10m	4.31 Volt	12.4 Volt	0.02 Ampere
1780192673	0 Pkt/10m	0 Pkt/10m	4.25 Volt	12.4 Volt	0.02 Ampere
1780191472	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.4 Volt	0.02 Ampere
1780190272	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.4 Volt	0.02 Ampere
1780189072	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.4 Volt	0.03 Ampere
1780187871	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.4 Volt	0.02 Ampere
1780186671	0 Pkt/10m	0 Pkt/10m	4.19 Volt	12.5 Volt	0.02 Ampere
1780185470	0 Pkt/10m	0 Pkt/10m	4.25 Volt	12.4 Volt	0.03 Ampere
1780184270	0 Pkt/10m	0 Pkt/10m	4.37 Volt	12.5 Volt	0.02 Ampere
1780183070	0 Pkt/10m	0 Pkt/10m	4.27 Volt	12.5 Volt	0.02 Ampere
1780181869	0 Pkt/10m	0 Pkt/10m	4.25 Volt	12.5 Volt	0.02 Ampere
1780180669	0 Pkt/10m	0 Pkt/10m	4.17 Volt	12.5 Volt	0.02 Ampere
1780179468	0 Pkt/10m	0 Pkt/10m	4.29 Volt	12.5 Volt	0.02 Ampere
1780178268	0 Pkt/10m	0 Pkt/10m	4.29 Volt	12.5 Volt	0.02 Ampere
1780177068	0 Pkt/10m	0 Pkt/10m	4.29 Volt	12.5 Volt	0.02 Ampere
1780175867	0 Pkt/10m	0 Pkt/10m	4.37 Volt	12.6 Volt	0.02 Ampere
1780174667	0 Pkt/10m	0 Pkt/10m	4.31 Volt	12.5 Volt	0.12 Ampere
1780173466	0 Pkt/10m	0 Pkt/10m	4.21 Volt	12.6 Volt	0.02 Ampere
1780172266	0 Pkt/10m	0 Pkt/10m	4.29 Volt	12.6 Volt	0.02 Ampere
1780171066	0 Pkt/10m	0 Pkt/10m	4.35 Volt	12.5 Volt	0.12 Ampere
1780169865	0 Pkt/10m	0 Pkt/10m	4.33 Volt	12.6 Volt	0.02 Ampere
1780168665	0 Pkt/10m	0 Pkt/10m	4.35 Volt	12.6 Volt	0.02 Ampere
1780167465	0 Pkt/10m	0 Pkt/10m	4.35 Volt	12.6 Volt	0.02 Ampere
1780166264	0 Pkt/10m	0 Pkt/10m	4.31 Volt	12.6 Volt	0.02 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)