This is the latest recevied telemetry packets stored in our database for station/object SR3DPX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794347132 | 672 | 728 | 344 | 0 | 0 |
| 1794346239 | 657 | 705 | 336 | 0 | 0 |
| 1794345330 | 621 | 666 | 317 | 0 | 0 |
| 1794344429 | 584 | 626 | 298 | 0 | 0 |
| 1794343532 | 569 | 604 | 290 | 0 | 0 |
| 1794342629 | 530 | 568 | 271 | 0 | 0 |
| 1794341726 | 507 | 535 | 258 | 0 | 0 |
| 1794340826 | 488 | 510 | 246 | 0 | 0 |
| 1794339926 | 469 | 487 | 236 | 0 | 0 |
| 1794339025 | 456 | 465 | 228 | 0 | 0 |
| 1794338124 | 449 | 450 | 224 | 0 | 0 |
| 1794337223 | 424 | 422 | 210 | 0 | 0 |
| 1794336319 | 407 | 395 | 201 | 0 | 0 |
| 1794335421 | 383 | 365 | 187 | 0 | 0 |
| 1794334520 | 362 | 336 | 176 | 0 | 0 |
| 1794333620 | 315 | 294 | 152 | 0 | 0 |
| 1794330937 | 138 | 123 | 63 | 0 | 0 |
| 1794330038 | 72 | 69 | 33 | 0 | 0 |
| 1794329134 | 1067 | 899 | 524 | 0 | 0 |
| 1794328233 | 983 | 834 | 482 | 0 | 0 |
| 1794327332 | 920 | 785 | 450 | 0 | 0 |
| 1794326435 | 836 | 728 | 414 | 0 | 0 |
| 1794323730 | 645 | 588 | 324 | 0 | 0 |
| 1794322829 | 600 | 546 | 302 | 0 | 0 |
| 1794321928 | 534 | 497 | 269 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)