PenangAPRS Track

My position About ☰

reset

YC0ASW-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC0ASW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Pressure*
1782504878	34 °C	47 %RH	1009 hPa
1782504078	34 °C	48 %RH	1009 hPa
1782503278	34 °C	47 %RH	1009 hPa
1782501678	34 °C	47 %RH	1009 hPa
1782500878	34 °C	48 %RH	1009 hPa
1782500078	34 °C	47 %RH	1009 hPa
1782499278	34 °C	47 %RH	1009 hPa
1782498478	34 °C	47 %RH	1009 hPa
1782496878	34 °C	48 %RH	1010 hPa
1782496079	34 °C	48 %RH	1009 hPa
1782495278	34 °C	48 %RH	1010 hPa
1782494478	34 °C	47 %RH	1010 hPa
1782493678	34 °C	48 %RH	1010 hPa
1782492879	34 °C	47 %RH	1010 hPa
1782492078	34 °C	47 %RH	1010 hPa
1782490478	34 °C	47 %RH	1010 hPa
1782488878	34 °C	47 %RH	1010 hPa
1782488078	34 °C	48 %RH	1010 hPa
1782487278	35 °C	48 %RH	1010 hPa
1782486478	34 °C	48 %RH	1010 hPa
1782485679	35 °C	47 %RH	1010 hPa
1782484878	35 °C	48 %RH	1010 hPa
1782484078	34 °C	48 %RH	1010 hPa
1782483278	34 °C	50 %RH	1010 hPa
1782482478	32 °C	56 %RH	1010 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Voltage: 0, 1, 0

Current: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)