This is the latest recevied telemetry packets stored in our database for station/object WW0K-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | AccRMS* | PeakG* | CrestFactor* | TempC* | Value5* |
|---|---|---|---|---|---|
| 1780172920 | 0.01 | 0.16 | 10 | 43.54 | 0 |
| 1780172320 | 0.01 | 0.12 | 10 | 44.71 | 0 |
| 1780171720 | 0.01 | 0.03 | 3.75 | 43.02 | 0 |
| 1780171120 | 0.01 | 0.05 | 4.86 | 41.08 | 0 |
| 1780170520 | 0.01 | 0.06 | 6.85 | 41.18 | 0 |
| 1780169920 | 0.01 | 0.05 | 5.21 | 38.83 | 0 |
| 1780169319 | 0.01 | 0.2 | 10 | 37.14 | 0 |
| 1780168719 | 0.01 | 0.05 | 5.82 | 35.82 | 0 |
| 1780168119 | 0.01 | 0.05 | 5.33 | 35.11 | 0 |
| 1780167519 | 0.01 | 0.09 | 6.97 | 34.97 | 0 |
| 1780166919 | 0.01 | 0.1 | 9.04 | 35.82 | 0 |
| 1780166319 | 0.01 | 0.12 | 8.55 | 37.37 | 0 |
| 1780165719 | 0.01 | 0.2 | 10 | 38.21 | 0 |
| 1780165119 | 0.02 | 0.13 | 8.59 | 39.02 | 0 |
| 1780164519 | 0.01 | 0.25 | 10 | 40.05 | 0 |
| 1780163919 | 0.02 | 0.12 | 7.58 | 39.49 | 0 |
| 1780163319 | 0.02 | 0.21 | 10 | 40.38 | 0 |
| 1780162719 | 0.02 | 0.21 | 10 | 43.25 | 0 |
| 1780162119 | 0.01 | 0.17 | 10 | 42.64 | 0 |
| 1780161519 | 0.01 | 0.05 | 5.2 | 41.56 | 0 |
| 1780160919 | 0.01 | 0.03 | 3.49 | 40.61 | 0 |
| 1780160319 | 0.01 | 0.06 | 6.82 | 40.71 | 0 |
| 1780159719 | 0.01 | 0.1 | 8.76 | 40.47 | 0 |
| 1780159119 | 0.01 | 0.25 | 10 | 40.99 | 0 |
| 1780158519 | 0.01 | 0.09 | 7.67 | 42.22 | 0 |
*Used Equation Coefficients:
AccRMS: 0, 0.000121, 0
PeakG: 0, 0.000242, 0
CrestFactor: 0, 0.001208, 0
TempC: 0, 0.012077, -50
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)