PenangAPRS Track

My position About ☰

reset

HS5AU-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5AU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	VBAT*	IBAT*	SOLAR*	SUN*	TEMP*
1780190413	13.33 V	-180 mA	16.98 V	223 W/m²	25.29 °C
1780189814	13.3 V	-108 mA	16.97 V	176 W/m²	25.13 °C
1780189213	13.3 V	-134 mA	16.97 V	195 W/m²	25.28 °C
1780188614	13.29 V	-154 mA	16.98 V	185 W/m²	24.82 °C
1780188014	13.26 V	-83 mA	16.96 V	147 W/m²	24.67 °C
1780187414	13.25 V	-85 mA	16.96 V	142 W/m²	24.6 °C
1780186813	13.25 V	-111 mA	16.97 V	173 W/m²	24.46 °C
1780186214	13.21 V	-77 mA	16.97 V	194 W/m²	24.21 °C
1780185613	13.18 V	-23 mA	16.96 V	126 W/m²	24.24 °C
1780185013	13.16 V	10 mA	16.96 V	124 W/m²	23.54 °C
1780184413	13.15 V	9 mA	16.96 V	74 W/m²	22.79 °C
1780183814	13.15 V	22 mA	16.96 V	63 W/m²	22.39 °C
1780183214	13.14 V	30 mA	16.96 V	50 W/m²	22.68 °C
1780182614	13.14 V	66 mA	16.73 V	30 W/m²	22.72 °C
1780182014	13.14 V	45 mA	15.82 V	17 W/m²	22.68 °C
1780181413	13.14 V	43 mA	13.42 V	4 W/m²	22.55 °C
1780180813	13.14 V	47 mA	9.75 V	2 W/m²	22.57 °C
1780180214	13.14 V	58 mA	7.42 V	2 W/m²	22.83 °C
1780179613	13.14 V	64 mA	7.42 V	2 W/m²	22.85 °C
1780179013	13.14 V	48 mA	7.42 V	2 W/m²	22.75 °C
1780178413	13.14 V	45 mA	7.43 V	2 W/m²	22.73 °C
1780177814	13.14 V	42 mA	7.43 V	2 W/m²	22.35 °C
1780177214	13.14 V	44 mA	7.43 V	2 W/m²	22.17 °C
1780176613	13.14 V	47 mA	7.43 V	2 W/m²	22.15 °C
1780176014	13.13 V	93 mA	7.43 V	2 W/m²	22.05 °C

*Used Equation Coefficients:

VBAT: 0, 0.01, 0

IBAT: 0, 1, -2000

SOLAR: 0, 0.01, 0

SUN: 0, 1, 0

TEMP: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)