This is the latest recevied telemetry packets stored in our database for station/object LB4FH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | GAS* |
|---|---|---|---|---|---|
| 1774199203 | 3.97 | 24.8 | 39.96 | 1020.25 | 20.87 |
| 1774198300 | 3.92 | 23.1 | 47.26 | 1019.5 | 20.56 |
| 1774197397 | 3.82 | 22.2 | 44.6 | 1020.75 | 21.4 |
| 1774196494 | 3.86 | 22.4 | 41.26 | 1020.75 | 22.29 |
| 1774195591 | 3.87 | 21.8 | 41.08 | 1020.5 | 22.8 |
| 1774194688 | 3.9 | 22.3 | 39.62 | 1020.13 | 22.06 |
| 1774193785 | 3.92 | 22.3 | 39.75 | 1020.38 | 21.06 |
| 1774192882 | 3.92 | 22.3 | 39.99 | 1020.13 | 19.94 |
| 1774191979 | 3.93 | 22.1 | 40.95 | 1020 | 18.15 |
| 1774191076 | 3.94 | 22.2 | 40.43 | 1020.5 | 16.51 |
| 1774190173 | 3.97 | 22.7 | 39.76 | 1020.63 | 14.21 |
| 1774188347 | 4.06 | 25.5 | 38.71 | 1010.75 | 12.9 |
| 1774188188 | 3.67 | 33.1 | 43.22 | 1020.75 | 6.49 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
GAS: 0, 0.01, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)