This is the latest recevied telemetry packets stored in our database for station/object SV6GIM-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780206156 | 24.4 C | 1021.38 hPa | 0 | 0 | 0 |
| 1780205252 | 24.4 C | 1021.5 hPa | 0 | 0 | 0 |
| 1780204348 | 24.4 C | 1021 hPa | 0 | 0 | 0 |
| 1780203445 | 24.3 C | 1021.38 hPa | 0 | 0 | 0 |
| 1780202540 | 24.4 C | 1021.63 hPa | 0 | 0 | 0 |
| 1780201636 | 24.4 C | 1021.5 hPa | 0 | 0 | 0 |
| 1780200732 | 24.4 C | 1021.5 hPa | 0 | 0 | 0 |
| 1780199828 | 24.5 C | 1021.63 hPa | 0 | 0 | 0 |
| 1780198925 | 24.5 C | 1021.38 hPa | 0 | 0 | 0 |
| 1780198020 | 24.5 C | 1021.25 hPa | 0 | 0 | 0 |
| 1780197116 | 24.5 C | 1021.63 hPa | 0 | 0 | 0 |
| 1780196212 | 24.6 C | 1021.25 hPa | 0 | 0 | 0 |
| 1780194405 | 24.6 C | 1021.88 hPa | 0 | 0 | 0 |
| 1780193500 | 24.6 C | 1021.38 hPa | 0 | 0 | 0 |
| 1780191692 | 24.7 C | 1021.38 hPa | 0 | 0 | 0 |
| 1780190788 | 24.7 C | 1022 hPa | 0 | 0 | 0 |
| 1780188980 | 24.8 C | 1022 hPa | 0 | 0 | 0 |
| 1780188076 | 24.9 C | 1021.63 hPa | 0 | 0 | 0 |
| 1780187172 | 25 C | 1021.75 hPa | 0 | 0 | 0 |
| 1780186268 | 25.1 C | 1022.13 hPa | 0 | 0 | 0 |
| 1780185365 | 25.3 C | 1021.63 hPa | 0 | 0 | 0 |
| 1780184460 | 25.7 C | 1022.25 hPa | 0 | 0 | 0 |
| 1780181748 | 26.1 C | 1021.88 hPa | 0 | 0 | 0 |
| 1780180845 | 26.1 C | 1022.25 hPa | 0 | 0 | 0 |
| 1780179940 | 26.2 C | 1022.25 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)