This is the latest recevied telemetry packets stored in our database for station/object N3RPH-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786394228 | 12.85 volts | 0 | 0 | 0 | 0 |
| 1786393627 | 12.86 volts | 0 | 0 | 0 | 0 |
| 1786393026 | 12.86 volts | 0 | 0 | 0 | 0 |
| 1786392426 | 12.87 volts | 0 | 0 | 0 | 0 |
| 1786391826 | 12.87 volts | 0 | 0 | 0 | 0 |
| 1786391228 | 12.87 volts | 0 | 0 | 0 | 0 |
| 1786390626 | 12.88 volts | 0 | 0 | 0 | 0 |
| 1786390028 | 12.88 volts | 0 | 0 | 0 | 0 |
| 1786389425 | 12.9 volts | 0 | 0 | 0 | 0 |
| 1786388825 | 12.9 volts | 0 | 0 | 0 | 0 |
| 1786388225 | 12.9 volts | 0 | 0 | 0 | 0 |
| 1786387626 | 12.91 volts | 0 | 0 | 0 | 0 |
| 1786387026 | 12.91 volts | 0 | 0 | 0 | 0 |
| 1786386425 | 12.91 volts | 0 | 0 | 0 | 0 |
| 1786385826 | 12.91 volts | 0 | 0 | 0 | 0 |
| 1786385227 | 12.92 volts | 0 | 0 | 0 | 0 |
| 1786384626 | 12.92 volts | 0 | 0 | 0 | 0 |
| 1786384027 | 12.92 volts | 0 | 0 | 0 | 0 |
| 1786383426 | 12.93 volts | 0 | 0 | 0 | 0 |
| 1786382827 | 12.93 volts | 0 | 0 | 0 | 0 |
| 1786382226 | 12.93 volts | 0 | 0 | 0 | 0 |
| 1786381626 | 12.95 volts | 0 | 0 | 0 | 0 |
| 1786381026 | 12.95 volts | 0 | 0 | 0 | 0 |
| 1786380426 | 12.95 volts | 0 | 0 | 0 | 0 |
| 1786379826 | 12.96 volts | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)