This is the latest recevied telemetry packets stored in our database for station/object SV6GIM-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786395383 | 28.8 C | 1018.13 hPa | 0 | 0 | 0 |
| 1786386352 | 32.1 C | 1018 hPa | 0 | 0 | 0 |
| 1786384286 | 32.9 C | 1017.13 hPa | 0 | 0 | 0 |
| 1786383943 | 33 C | 1011 hPa | 0 | 0 | 0 |
| 1786382384 | 33.6 C | 1017 hPa | 0 | 0 | 0 |
| 1786381864 | 33.6 C | 1013.13 hPa | 0 | 0 | 0 |
| 1786377887 | 35.3 C | 1016.5 hPa | 0 | 0 | 0 |
| 1786377828 | 35.3 C | 1016.5 hPa | 0 | 0 | 0 |
| 1786377424 | 35.1 C | 1016.5 hPa | 0 | 0 | 0 |
| 1786377214 | 35.2 C | 1015.5 hPa | 0 | 0 | 0 |
| 1786373203 | 37.8 C | 1016 hPa | 0 | 0 | 0 |
| 1786364165 | 38.7 C | 1017.63 hPa | 0 | 0 | 0 |
| 1786355135 | 35.2 C | 1018.25 hPa | 0 | 0 | 0 |
| 1786352212 | 32.9 C | 1017.63 hPa | 0 | 0 | 0 |
| 1786351965 | 32.3 C | 1018.5 hPa | 0 | 0 | 0 |
| 1786348921 | 26.5 C | 1018.88 hPa | 0 | 0 | 0 |
| 1786348128 | 27.2 C | 1018.13 hPa | 0 | 0 | 0 |
| 1786344855 | 25.8 C | 1020.25 hPa | 0 | 0 | 0 |
| 1786344387 | 23.7 C | 1020.25 hPa | 0 | 0 | 0 |
| 1786344224 | 23.2 C | 1026.75 hPa | 0 | 0 | 0 |
| 1786343830 | 22.4 C | 1025 hPa | 0 | 0 | 0 |
| 1786343476 | 21.5 C | 1022.5 hPa | 0 | 0 | 0 |
| 1786343077 | 20.7 C | 1023.75 hPa | 0 | 0 | 0 |
| 1786342865 | 20.1 C | 1028.38 hPa | 0 | 0 | 0 |
| 1786339509 | 18.8 C | 1024.38 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)