This is the latest recevied telemetry packets stored in our database for station/object SA2KLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774170304 | 25.1 | 34.64 | 1006.88 | 0 | 0 |
| 1774169459 | 25 | 34.8 | 1008.38 | 0 | 0 |
| 1774168614 | 25 | 34.79 | 1007.25 | 0 | 0 |
| 1774167769 | 25 | 34.39 | 1005 | 0 | 0 |
| 1774166924 | 25.1 | 34.49 | 1005.25 | 0 | 0 |
| 1774166080 | 25.1 | 34.46 | 1007.88 | 0 | 0 |
| 1774165235 | 25.1 | 34.4 | 1007.88 | 0 | 0 |
| 1774164389 | 25.1 | 34.39 | 1008.25 | 0 | 0 |
| 1774163544 | 25 | 34.51 | 1005 | 0 | 0 |
| 1774162699 | 25 | 34.45 | 1013.38 | 0 | 0 |
| 1774161854 | 24.9 | 34.37 | 1007.5 | 0 | 0 |
| 1774161007 | 24.9 | 34.16 | 1007.75 | 0 | 0 |
| 1774160162 | 24.8 | 33.93 | 1009.25 | 0 | 0 |
| 1774159317 | 24.8 | 33.88 | 1009.25 | 0 | 0 |
| 1774158472 | 24.9 | 33.91 | 1006.63 | 0 | 0 |
| 1774157627 | 24.9 | 33.92 | 1009.63 | 0 | 0 |
| 1774156782 | 24.9 | 33.98 | 1007.25 | 0 | 0 |
| 1774155937 | 24.9 | 33.69 | 1007.88 | 0 | 0 |
| 1774155093 | 24.9 | 33.95 | 1011.75 | 0 | 0 |
| 1774154247 | 24.9 | 33.93 | 1010.75 | 0 | 0 |
| 1774153403 | 24.9 | 33.73 | 1010 | 0 | 0 |
| 1774152557 | 25 | 33.97 | 1007.38 | 0 | 0 |
| 1774151712 | 25 | 34.01 | 1008.38 | 0 | 0 |
| 1774150869 | 25 | 33.9 | 1007.13 | 0 | 0 |
| 1774150022 | 25 | 34 | 1010.5 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)