This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794344353 | 3.85 VDC | 1.44 VDC | 0 | 0 | 0 |
| 1794343633 | 3.86 VDC | 1.44 VDC | 0 | 0 | 0 |
| 1794342913 | 3.85 VDC | 1.5 VDC | 0 | 0 | 0 |
| 1794342191 | 3.87 VDC | 1.22 VDC | 0 | 0 | 0 |
| 1794341486 | 3.85 VDC | 1.26 VDC | 0 | 0 | 0 |
| 1794340766 | 3.87 VDC | 1.46 VDC | 0 | 0 | 0 |
| 1794340046 | 3.86 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1794339326 | 3.85 VDC | 1.26 VDC | 0 | 0 | 0 |
| 1794338605 | 3.87 VDC | 1.2 VDC | 0 | 0 | 0 |
| 1794337885 | 3.86 VDC | 1.32 VDC | 0 | 0 | 0 |
| 1794337165 | 3.87 VDC | 1.22 VDC | 0 | 0 | 0 |
| 1794336445 | 3.85 VDC | 1 VDC | 0 | 0 | 0 |
| 1794335724 | 3.86 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1794335004 | 3.88 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1794334284 | 3.86 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1794333564 | 3.86 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1794332843 | 3.86 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1794332123 | 3.84 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1794331403 | 3.88 VDC | 1.36 VDC | 0 | 0 | 0 |
| 1794330682 | 3.87 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1794329962 | 3.86 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1794329242 | 3.88 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1794328522 | 3.88 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1794327801 | 3.87 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1794327081 | 3.86 VDC | 0.86 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)