This is the latest recevied telemetry packets stored in our database for station/object EC5CIA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769808524 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769807625 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769806724 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769805824 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769804924 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769804024 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769803124 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769802224 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769801324 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769800424 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769799524 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769798624 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769797724 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769796824 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769795924 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769795024 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769794124 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769793224 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769792324 | 0 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1769791424 | 0 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1769790524 | 0 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1769789623 | 0 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1769788723 | 0 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1769787824 | 0 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1769786923 | 0 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)