This is the latest recevied telemetry packets stored in our database for station/object 9M2DAU-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773761660 | 402 | 123 | 0 | 0 | 0 |
| 1773760759 | 402 | 123 | 0 | 0 | 0 |
| 1773759859 | 403 | 123 | 0 | 0 | 0 |
| 1773758958 | 403 | 123 | 0 | 0 | 0 |
| 1773758058 | 403 | 123 | 0 | 0 | 0 |
| 1773756258 | 403 | 123 | 0 | 0 | 0 |
| 1773753557 | 403 | 123 | 0 | 0 | 0 |
| 1773750852 | 403 | 123 | 0 | 0 | 0 |
| 1773749952 | 402 | 123 | 0 | 0 | 0 |
| 1773749052 | 403 | 123 | 0 | 0 | 0 |
| 1773748151 | 403 | 123 | 0 | 0 | 0 |
| 1773747251 | 403 | 123 | 0 | 0 | 0 |
| 1773746351 | 404 | 123 | 0 | 0 | 0 |
| 1773745455 | 403 | 123 | 0 | 0 | 0 |
| 1773743658 | 403 | 123 | 0 | 0 | 0 |
| 1773742734 | 403 | 124 | 0 | 0 | 0 |
| 1773740934 | 403 | 123 | 0 | 0 | 0 |
| 1773739133 | 404 | 124 | 0 | 0 | 0 |
| 1773736432 | 404 | 124 | 0 | 0 | 0 |
| 1773733732 | 404 | 124 | 0 | 0 | 0 |
| 1773732835 | 404 | 124 | 0 | 0 | 0 |
| 1773731910 | 404 | 124 | 0 | 0 | 0 |
| 1773730111 | 404 | 124 | 0 | 0 | 0 |
| 1773727412 | 404 | 124 | 0 | 0 | 0 |
| 1773726509 | 404 | 124 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)