This is the latest recevied telemetry packets stored in our database for station/object YD1AFF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790326054 | 37 °C | 38 %RH | 1008 hPa | 0 | 0 |
| 1790324154 | 38 °C | 33 %RH | 1008 hPa | 0 | 0 |
| 1790322254 | 40 °C | 32 %RH | 1008 hPa | 0 | 0 |
| 1790320354 | 41 °C | 30 %RH | 1008 hPa | 0 | 0 |
| 1790318454 | 42 °C | 29 %RH | 1008 hPa | 0 | 0 |
| 1790316554 | 42 °C | 29 %RH | 1009 hPa | 0 | 0 |
| 1790314654 | 43 °C | 29 %RH | 1009 hPa | 0 | 0 |
| 1790312754 | 42 °C | 31 %RH | 1010 hPa | 0 | 0 |
| 1790310854 | 41 °C | 33 %RH | 1010 hPa | 0 | 0 |
| 1790308954 | 42 °C | 33 %RH | 1011 hPa | 0 | 0 |
| 1790307053 | 41 °C | 34 %RH | 1011 hPa | 0 | 0 |
| 1790305153 | 39 °C | 36 %RH | 1012 hPa | 0 | 0 |
| 1790303253 | 39 °C | 36 %RH | 1012 hPa | 0 | 0 |
| 1790301353 | 38 °C | 38 %RH | 1012 hPa | 0 | 0 |
| 1790299453 | 37 °C | 41 %RH | 1012 hPa | 0 | 0 |
| 1790297553 | 35 °C | 46 %RH | 1011 hPa | 0 | 0 |
| 1790295653 | 33 °C | 51 %RH | 1011 hPa | 0 | 0 |
| 1790293753 | 31 °C | 56 %RH | 1011 hPa | 0 | 0 |
| 1790291853 | 29 °C | 58 %RH | 1011 hPa | 0 | 0 |
| 1790289953 | 29 °C | 59 %RH | 1010 hPa | 0 | 0 |
| 1790288053 | 29 °C | 59 %RH | 1010 hPa | 0 | 0 |
| 1790286153 | 29 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1790284253 | 29 °C | 58 %RH | 1010 hPa | 0 | 0 |
| 1790282353 | 29 °C | 58 %RH | 1009 hPa | 0 | 0 |
| 1790280453 | 29 °C | 58 %RH | 1009 hPa | 0 | 0 |
*Used Equation Coefficients:
Temperatu: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)