This is the latest recevied telemetry packets stored in our database for station/object LA7DHA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794401107 | 4.52 VDC | 21.2 C | 36.18 % | 0 | 0 |
| 1794400925 | 4.52 VDC | 20.3 C | 38.41 % | 0 | 0 |
| 1794400745 | 4.51 VDC | 19.1 C | 39.34 % | 0 | 0 |
| 1794400551 | 4.51 VDC | 17.1 C | 43.47 % | 0 | 0 |
| 1794400171 | 4.46 VDC | 13.1 C | 49.66 % | 0 | 0 |
| 1794399956 | 4.46 VDC | 10.7 C | 53.56 % | 0 | 0 |
| 1794395512 | 4.51 VDC | 20.1 C | 41.14 % | 0 | 0 |
| 1794395117 | 4.51 VDC | 18.2 C | 43.31 % | 0 | 0 |
| 1794394321 | 4.48 VDC | 11.5 C | 55.39 % | 0 | 0 |
| 1794394110 | 4.48 VDC | 8.7 C | 58.86 % | 0 | 0 |
| 1794383870 | 4.52 VDC | 22.4 C | 37.68 % | 0 | 0 |
| 1794383442 | 4.52 VDC | 21.4 C | 39.38 % | 0 | 0 |
| 1794382973 | 4.51 VDC | 19.7 C | 41.91 % | 0 | 0 |
| 1794382574 | 4.5 VDC | 17.3 C | 45.85 % | 0 | 0 |
| 1794382381 | 4.5 VDC | 15.5 C | 49.78 % | 0 | 0 |
| 1794382200 | 4.48 VDC | 13.2 C | 54.34 % | 0 | 0 |
| 1794381785 | 4.46 VDC | 5.2 C | 72.36 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)