PenangAPRS Track

My position About ☰

reset

VO2AGO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VO2AGO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	GenHrs*	IndoorTemp*	FreezerTemp*	HatTemp*
1774528026	13.89 V	15.5 Hr	-11.9 C	-7.8 C	2.4 C
1774527725	13.87 V	15.5 Hr	-11.9 C	-7.7 C	2.4 C
1774527425	13.86 V	15.5 Hr	-11.9 C	-7.6 C	2.2 C
1774527125	13.82 V	15.5 Hr	-11.8 C	-7.6 C	2.2 C
1774526826	13.59 V	15.5 Hr	-11.8 C	-7.6 C	2.4 C
1774526525	13.38 V	15.5 Hr	-11.8 C	-7.6 C	2.4 C
1774526226	13.16 V	15.5 Hr	-11.8 C	-7.6 C	2.4 C
1774525925	12.92 V	15.5 Hr	-11.7 C	-7.6 C	2.5 C
1774525626	12.79 V	15.5 Hr	-11.7 C	-7.5 C	2.4 C
1774525326	12.63 V	15.5 Hr	-11.6 C	-7.5 C	2.5 C
1774525026	12.54 V	15.5 Hr	-11.6 C	-7.5 C	2.4 C
1774524725	12.42 V	15.5 Hr	-11.6 C	-7.5 C	2.4 C
1774524425	12.35 V	15.5 Hr	-11.5 C	-7.5 C	2.6 C
1774524125	12.31 V	15.5 Hr	-11.5 C	-7.5 C	2.6 C
1774523825	12.25 V	15.5 Hr	-11.4 C	-7.5 C	2.7 C
1774523526	12.22 V	15.5 Hr	-11.4 C	-7.5 C	2.6 C
1774523225	12.19 V	15.5 Hr	-11.4 C	-7.5 C	2.8 C
1774522926	12.16 V	15.5 Hr	-11.3 C	-7.5 C	2.8 C
1774522625	12.14 V	15.5 Hr	-11.2 C	-7.5 C	2.8 C
1774522325	12.12 V	15.5 Hr	-11.2 C	-7.5 C	2.8 C
1774522026	12.1 V	15.5 Hr	-11.2 C	-7.5 C	3.1 C
1774521725	12.09 V	15.5 Hr	-11.1 C	-7.5 C	3.1 C
1774521426	12.08 V	15.5 Hr	-11.1 C	-7.6 C	3 C
1774521125	12.07 V	15.5 Hr	-11.1 C	-7.6 C	3.1 C
1774520825	12.06 V	15.5 Hr	-11 C	-7.6 C	2.9 C

*Used Equation Coefficients:

Battery: 0, 0.01, 0

GenHrs: 0, 0.1, 0

IndoorTemp: 0, 0.01, -50

FreezerTemp: 0, 0.01, -50

HatTemp: 0, 0.01, -30

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)