This is the latest recevied telemetry packets stored in our database for station/object LA3NUA-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1786406366 | 3.15 VDC | 22.7 C | 53.59 % | 1017.25 hPa | 0 |
| 1786398204 | 3.36 VDC | 24.3 C | 53.57 % | 1012.88 hPa | 0 |
| 1786393830 | 3.42 VDC | 25.2 C | 53.73 % | 1011.13 hPa | 0 |
| 1786386929 | 3.46 VDC | 25.5 C | 52.71 % | 1012 hPa | 0 |
| 1786381716 | 3.51 VDC | 26.5 C | 53.09 % | 1008.13 hPa | 0 |
| 1786374931 | 3.56 VDC | 27.7 C | 49.25 % | 1011 hPa | 0 |
| 1786367738 | 3.61 VDC | 26.5 C | 51.65 % | 1002.75 hPa | 0 |
| 1786358713 | 3.66 VDC | 25.6 C | 51.87 % | 997.75 hPa | 0 |
| 1786349687 | 3.72 VDC | 23.9 C | 54.8 % | 994.38 hPa | 0 |
| 1786340661 | 3.79 VDC | 23.1 C | 53.4 % | 994.75 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)