This is the latest recevied telemetry packets stored in our database for station/object LU6EEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794342480 | 709 Count | 530 Count | 503 Count | 4.13 VDC | 0 VDC |
| 1794341577 | 707 Count | 529 Count | 502 Count | 4.13 VDC | 0 VDC |
| 1794340674 | 703 Count | 526 Count | 499 Count | 4.13 VDC | 0 VDC |
| 1794339771 | 701 Count | 525 Count | 498 Count | 4.16 VDC | 0 VDC |
| 1794338868 | 698 Count | 523 Count | 496 Count | 4.13 VDC | 0 VDC |
| 1794337965 | 696 Count | 522 Count | 495 Count | 4.13 VDC | 0 VDC |
| 1794337062 | 693 Count | 520 Count | 493 Count | 4.13 VDC | 0 VDC |
| 1794336158 | 691 Count | 519 Count | 492 Count | 4.13 VDC | 0 VDC |
| 1794335255 | 688 Count | 517 Count | 490 Count | 4.13 VDC | 0 VDC |
| 1794334352 | 686 Count | 516 Count | 489 Count | 4.13 VDC | 0 VDC |
| 1794333449 | 683 Count | 514 Count | 487 Count | 4.13 VDC | 0 VDC |
| 1794332546 | 681 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
| 1794332470 | 680 Count | 513 Count | 486 Count | 4.14 VDC | 0 VDC |
| 1794332363 | 679 Count | 513 Count | 486 Count | 4.14 VDC | 0 VDC |
| 1794332310 | 674 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
| 1794332224 | 673 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
| 1794332210 | 672 Count | 513 Count | 486 Count | 4.14 VDC | 0 VDC |
| 1794332141 | 671 Count | 513 Count | 486 Count | 4.16 VDC | 0 VDC |
| 1794332117 | 671 Count | 513 Count | 486 Count | 4.16 VDC | 0 VDC |
| 1794331847 | 671 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
| 1794331731 | 671 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
| 1794331684 | 671 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
| 1794331435 | 671 Count | 513 Count | 486 Count | 4.16 VDC | 0 VDC |
| 1794330598 | 671 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
| 1794329698 | 671 Count | 513 Count | 486 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)