This is the latest recevied telemetry packets stored in our database for station/object YE3ESW-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790314195 | 33 °C | 35 %RH | 1012 hPa | 0 | 0 |
| 1790314131 | 34 °C | 35 %RH | 1012 hPa | 0 | 0 |
| 1790314074 | 34 °C | 35 %RH | 1012 hPa | 0 | 0 |
| 1790314010 | 34 °C | 35 %RH | 1012 hPa | 0 | 0 |
| 1790313946 | 34 °C | 35 %RH | 1012 hPa | 0 | 0 |
| 1790313882 | 34 °C | 36 %RH | 1013 hPa | 0 | 0 |
| 1790313819 | 34 °C | 36 %RH | 1013 hPa | 0 | 0 |
| 1790313755 | 34 °C | 36 %RH | 1013 hPa | 0 | 0 |
| 1790313691 | 33 °C | 37 %RH | 1013 hPa | 0 | 0 |
| 1790313620 | 34 °C | 37 %RH | 1013 hPa | 0 | 0 |
| 1790313553 | 34 °C | 37 %RH | 1013 hPa | 0 | 0 |
| 1790313489 | 34 °C | 37 %RH | 1013 hPa | 0 | 0 |
| 1790313361 | 34 °C | 38 %RH | 1013 hPa | 0 | 0 |
| 1790313295 | 34 °C | 38 %RH | 1013 hPa | 0 | 0 |
| 1790313249 | 34 °C | 45 %RH | 1015 hPa | 0 | 0 |
| 1790313167 | 34 °C | 38 %RH | 1013 hPa | 0 | 0 |
| 1790313103 | 34 °C | 39 %RH | 1013 hPa | 0 | 0 |
| 1790313046 | 35 °C | 39 %RH | 1013 hPa | 0 | 0 |
| 1790312982 | 35 °C | 40 %RH | 1013 hPa | 0 | 0 |
| 1790312918 | 35 °C | 41 %RH | 1013 hPa | 0 | 0 |
| 1790312890 | 34 °C | 45 %RH | 1015 hPa | 0 | 0 |
| 1790312854 | 35 °C | 41 %RH | 1013 hPa | 0 | 0 |
| 1790312790 | 35 °C | 41 %RH | 1013 hPa | 0 | 0 |
| 1790312662 | 35 °C | 42 %RH | 1013 hPa | 0 | 0 |
| 1790312592 | 35 °C | 41 %RH | 1013 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)