This is the latest recevied telemetry packets stored in our database for station/object M7OMH-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781927467 | 780 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781925666 | 769 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781923866 | 761 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781922065 | 751 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781920265 | 743 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781918463 | 733 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781916663 | 725 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781914862 | 715 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781913061 | 707 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781889668 | 587 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781887867 | 576 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781886066 | 563 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781884266 | 552 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781882465 | 539 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781880664 | 527 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781878863 | 514 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781877063 | 501 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781875263 | 489 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781873462 | 478 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781871661 | 465 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781869860 | 454 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781846469 | 277 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781844668 | 264 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1781842866 | 250 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)