This is the latest recevied telemetry packets stored in our database for station/object SP6RTS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780200019 | 0 Count | 641 Count | 0 Count | 0 VDC | 0 VDC |
| 1780199119 | 0 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1780198219 | 0 Count | 619 Count | 0 Count | 0 VDC | 0 VDC |
| 1780197318 | 0 Count | 607 Count | 0 Count | 0 VDC | 0 VDC |
| 1780196418 | 0 Count | 596 Count | 0 Count | 0 VDC | 0 VDC |
| 1780195518 | 0 Count | 584 Count | 0 Count | 0 VDC | 0 VDC |
| 1780194618 | 0 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1780193718 | 0 Count | 561 Count | 0 Count | 0 VDC | 0 VDC |
| 1780192818 | 0 Count | 550 Count | 0 Count | 0 VDC | 0 VDC |
| 1780191918 | 0 Count | 537 Count | 0 Count | 0 VDC | 0 VDC |
| 1780191018 | 0 Count | 529 Count | 0 Count | 0 VDC | 0 VDC |
| 1780190118 | 0 Count | 516 Count | 0 Count | 0 VDC | 0 VDC |
| 1780189218 | 0 Count | 503 Count | 0 Count | 0 VDC | 0 VDC |
| 1780187417 | 0 Count | 478 Count | 0 Count | 0 VDC | 0 VDC |
| 1780186518 | 0 Count | 464 Count | 0 Count | 0 VDC | 0 VDC |
| 1780185618 | 0 Count | 455 Count | 0 Count | 0 VDC | 0 VDC |
| 1780184718 | 0 Count | 443 Count | 0 Count | 0 VDC | 0 VDC |
| 1780183818 | 0 Count | 429 Count | 0 Count | 0 VDC | 0 VDC |
| 1780182918 | 0 Count | 418 Count | 0 Count | 0 VDC | 0 VDC |
| 1780182018 | 0 Count | 407 Count | 0 Count | 0 VDC | 0 VDC |
| 1780181118 | 0 Count | 386 Count | 0 Count | 0 VDC | 0 VDC |
| 1780180217 | 0 Count | 374 Count | 0 Count | 0 VDC | 0 VDC |
| 1780179317 | 0 Count | 359 Count | 0 Count | 0 VDC | 0 VDC |
| 1780178417 | 0 Count | 350 Count | 0 Count | 0 VDC | 0 VDC |
| 1780177517 | 0 Count | 339 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)