This is the latest recevied telemetry packets stored in our database for station/object YB1TJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794352776 | 22 °C | 52 %RH | 0 hPa | 0 | 0 |
| 1794350776 | 22 °C | 51 %RH | 0 hPa | 0 | 0 |
| 1794348776 | 22 °C | 51 %RH | 0 hPa | 0 | 0 |
| 1794346776 | 22 °C | 50 %RH | 0 hPa | 0 | 0 |
| 1794344776 | 22 °C | 50 %RH | 0 hPa | 0 | 0 |
| 1794342776 | 22 °C | 49 %RH | 0 hPa | 0 | 0 |
| 1794340776 | 22 °C | 49 %RH | 0 hPa | 0 | 0 |
| 1794336776 | 21 °C | 48 %RH | 0 hPa | 0 | 0 |
| 1794334776 | 21 °C | 48 %RH | 0 hPa | 0 | 0 |
| 1794332776 | 21 °C | 46 %RH | 0 hPa | 0 | 0 |
| 1794330776 | 21 °C | 47 %RH | 0 hPa | 0 | 0 |
| 1794328776 | 21 °C | 46 %RH | 0 hPa | 0 | 0 |
| 1794326772 | 21 °C | 46 %RH | 0 hPa | 0 | 0 |
| 1794324772 | 21 °C | 43 %RH | 0 hPa | 0 | 0 |
| 1794322772 | 21 °C | 46 %RH | 0 hPa | 0 | 0 |
| 1794320772 | 21 °C | 45 %RH | 0 hPa | 0 | 0 |
| 1794318772 | 21 °C | 44 %RH | 0 hPa | 0 | 0 |
| 1794316773 | 21 °C | 44 %RH | 0 hPa | 0 | 0 |
| 1794314772 | 21 °C | 44 %RH | 0 hPa | 0 | 0 |
| 1794312772 | 21 °C | 41 %RH | 0 hPa | 0 | 0 |
| 1794310773 | 21 °C | 42 %RH | 0 hPa | 0 | 0 |
| 1794308772 | 21 °C | 40 %RH | 0 hPa | 0 | 0 |
| 1794306772 | 20 °C | 39 %RH | 0 hPa | 0 | 0 |
| 1794304772 | 20 °C | 38 %RH | 0 hPa | 0 | 0 |
| 1794302772 | 20 °C | 36 %RH | 0 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)