PenangAPRS Track

My position About ☰

reset

IZ0IIY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ0IIY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*
1771258463	419	33
1771257563	419	33
1771256663	418	33
1771255762	419	33
1771254862	419	33
1771253962	419	33
1771253062	419	33
1771252162	419	33
1771251261	419	33
1771250361	418	33
1771249461	420	33
1771248561	419	33
1771247660	419	33
1771246760	419	33
1771245860	419	33
1771244960	419	33
1771244060	419	33
1771243168	419	33
1771242259	418	33
1771241359	419	34
1771240459	419	33
1771239559	418	33
1771238658	419	33
1771237758	419	33
1771236860	419	33

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)