This is the latest recevied telemetry packets stored in our database for station/object IZ4HZA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794340136 | 3.64 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1794339236 | 3.67 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1794338336 | 3.69 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1794337435 | 3.71 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794336535 | 3.73 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1794335635 | 3.75 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794334735 | 3.76 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794333835 | 3.78 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1794331134 | 3.83 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794330234 | 3.85 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1794329333 | 3.86 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1794328433 | 3.88 VDC | 1.12 VDC | 0 | 0 | 0 |
| 1794327533 | 3.89 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794326633 | 3.9 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794325733 | 3.92 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794324832 | 3.93 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794323932 | 3.94 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1794323032 | 3.96 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1794322132 | 3.98 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1794321232 | 4 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1794320331 | 4.01 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1794319431 | 4.04 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1794316726 | 4.11 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1794315825 | 4.12 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1794314925 | 4.11 VDC | 1.04 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)