This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794349508 | 277 Count | 768 Count | 243 Count | 4.13 VDC | 0 VDC |
| 1794348607 | 271 Count | 748 Count | 238 Count | 4.12 VDC | 0 VDC |
| 1794347706 | 266 Count | 728 Count | 234 Count | 4.13 VDC | 0 VDC |
| 1794346805 | 260 Count | 717 Count | 229 Count | 4.13 VDC | 0 VDC |
| 1794345905 | 255 Count | 701 Count | 225 Count | 4.12 VDC | 0 VDC |
| 1794345004 | 251 Count | 695 Count | 222 Count | 4.12 VDC | 0 VDC |
| 1794344103 | 242 Count | 673 Count | 214 Count | 4.12 VDC | 0 VDC |
| 1794343202 | 236 Count | 660 Count | 209 Count | 4.13 VDC | 0 VDC |
| 1794342301 | 231 Count | 641 Count | 205 Count | 4.12 VDC | 0 VDC |
| 1794341400 | 225 Count | 622 Count | 200 Count | 4.13 VDC | 0 VDC |
| 1794340499 | 217 Count | 596 Count | 193 Count | 4.12 VDC | 0 VDC |
| 1794339598 | 202 Count | 555 Count | 179 Count | 4.13 VDC | 0 VDC |
| 1794338697 | 192 Count | 512 Count | 170 Count | 4.13 VDC | 0 VDC |
| 1794337797 | 184 Count | 495 Count | 163 Count | 4.12 VDC | 0 VDC |
| 1794336896 | 174 Count | 466 Count | 154 Count | 4.12 VDC | 0 VDC |
| 1794335995 | 164 Count | 435 Count | 145 Count | 4.13 VDC | 0 VDC |
| 1794335094 | 159 Count | 411 Count | 141 Count | 4.13 VDC | 0 VDC |
| 1794334193 | 151 Count | 383 Count | 134 Count | 4.13 VDC | 0 VDC |
| 1794333293 | 144 Count | 365 Count | 128 Count | 4.13 VDC | 0 VDC |
| 1794332392 | 135 Count | 324 Count | 120 Count | 4.12 VDC | 0 VDC |
| 1794331491 | 127 Count | 291 Count | 113 Count | 4.12 VDC | 0 VDC |
| 1794330590 | 112 Count | 244 Count | 99 Count | 4.12 VDC | 0 VDC |
| 1794329689 | 103 Count | 220 Count | 91 Count | 4.12 VDC | 0 VDC |
| 1794328788 | 93 Count | 188 Count | 82 Count | 4.12 VDC | 0 VDC |
| 1794327907 | 68 Count | 155 Count | 62 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)