This is the latest recevied telemetry packets stored in our database for station/object WHTANK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vb* | Vsp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773768588 | 4.22 Volt | 21.98 Volt | 0 | 0 | 0 |
| 1773767988 | 4.22 Volt | 21.84 Volt | 0 | 0 | 0 |
| 1773767388 | 4.23 Volt | 22.06 Volt | 0 | 0 | 0 |
| 1773766788 | 4.23 Volt | 5.46 Volt | 0 | 0 | 0 |
| 1773766188 | 4.21 Volt | 5.44 Volt | 0 | 0 | 0 |
| 1773765587 | 4.2 Volt | 5.44 Volt | 0 | 0 | 0 |
| 1773764987 | 4.19 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773764386 | 4.18 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773763786 | 4.18 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773763186 | 4.15 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773762585 | 4.14 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773761984 | 4.14 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773761384 | 4.13 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773760783 | 4.13 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773760183 | 4.13 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773759583 | 4.12 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773758983 | 4.12 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773758383 | 4.12 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773757782 | 4.12 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773757182 | 4.11 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773756581 | 4.11 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773755981 | 4.11 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773755380 | 4.11 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773754779 | 4.11 Volt | 5.42 Volt | 0 | 0 | 0 |
| 1773754178 | 4.11 Volt | 4.76 Volt | 0 | 0 | 0 |
*Used Equation Coefficients:
Vb: 0, 0.01, 0
Vsp: 0, 0.02, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)