This is the latest recevied telemetry packets stored in our database for station/object KC1VMZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769812530 | 4.44 VDC | 29.1 C | 13.47 % | 0 | 0 |
| 1769811627 | 4.44 VDC | 29.1 C | 13.11 % | 0 | 0 |
| 1769810724 | 4.46 VDC | 29.1 C | 13.39 % | 0 | 0 |
| 1769809821 | 4.44 VDC | 29.3 C | 13.6 % | 0 | 0 |
| 1769808918 | 4.44 VDC | 29.3 C | 13.3 % | 0 | 0 |
| 1769808015 | 4.44 VDC | 28.9 C | 13.11 % | 0 | 0 |
| 1769807112 | 4.44 VDC | 29 C | 13.15 % | 0 | 0 |
| 1769806209 | 4.44 VDC | 29.1 C | 13.14 % | 0 | 0 |
| 1769805306 | 4.44 VDC | 29.3 C | 13.19 % | 0 | 0 |
| 1769804403 | 4.46 VDC | 29.5 C | 13.27 % | 0 | 0 |
| 1769803500 | 4.44 VDC | 29.3 C | 13.27 % | 0 | 0 |
| 1769802597 | 4.44 VDC | 29.1 C | 13.13 % | 0 | 0 |
| 1769801694 | 4.44 VDC | 29.3 C | 12.78 % | 0 | 0 |
| 1769800791 | 4.44 VDC | 29.3 C | 12.85 % | 0 | 0 |
| 1769799888 | 4.44 VDC | 29 C | 13.17 % | 0 | 0 |
| 1769798985 | 4.44 VDC | 29.2 C | 13.24 % | 0 | 0 |
| 1769798082 | 4.44 VDC | 29.3 C | 13.08 % | 0 | 0 |
| 1769797179 | 4.44 VDC | 29.1 C | 13.18 % | 0 | 0 |
| 1769796276 | 4.44 VDC | 28.8 C | 13.13 % | 0 | 0 |
| 1769795373 | 4.44 VDC | 28.2 C | 13.22 % | 0 | 0 |
| 1769794470 | 4.44 VDC | 27.9 C | 13.09 % | 0 | 0 |
| 1769793567 | 4.46 VDC | 28.2 C | 13.24 % | 0 | 0 |
| 1769792646 | 4.44 VDC | 26.5 C | 14.53 % | 0 | 0 |
| 1769753401 | 4.36 VDC | 28.3 C | 15.45 % | 0 | 0 |
| 1769752498 | 4.37 VDC | 28.1 C | 15.62 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)