This is the latest recevied telemetry packets stored in our database for station/object SP8G-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786406758 | 21 Count | 349 Count | 0 Count | 3.94 VDC | 0 VDC |
| 1786405857 | 20 Count | 327 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1786404956 | 19 Count | 313 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1786404055 | 18 Count | 299 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1786403154 | 17 Count | 290 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1786402254 | 16 Count | 272 Count | 0 Count | 3.95 VDC | 0 VDC |
| 1786401353 | 15 Count | 223 Count | 0 Count | 3.96 VDC | 0 VDC |
| 1786400452 | 14 Count | 207 Count | 0 Count | 3.96 VDC | 0 VDC |
| 1786399551 | 13 Count | 193 Count | 0 Count | 3.96 VDC | 0 VDC |
| 1786398650 | 12 Count | 173 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1786396870 | 6 Count | 135 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1786395968 | 5 Count | 120 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1786395068 | 4 Count | 102 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786394166 | 3 Count | 84 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1786393266 | 2 Count | 68 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1786392365 | 1 Count | 53 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1786390563 | 73 Count | 1053 Count | 15 Count | 4 VDC | 0 VDC |
| 1786389662 | 72 Count | 990 Count | 15 Count | 4 VDC | 0 VDC |
| 1786388761 | 71 Count | 964 Count | 15 Count | 4 VDC | 0 VDC |
| 1786387860 | 70 Count | 947 Count | 15 Count | 4.01 VDC | 0 VDC |
| 1786386959 | 69 Count | 916 Count | 15 Count | 4.01 VDC | 0 VDC |
| 1786386058 | 59 Count | 878 Count | 6 Count | 4.02 VDC | 0 VDC |
| 1786385157 | 58 Count | 861 Count | 6 Count | 4.02 VDC | 0 VDC |
| 1786384256 | 57 Count | 850 Count | 6 Count | 4.03 VDC | 0 VDC |
| 1786383355 | 56 Count | 831 Count | 6 Count | 4.04 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)