This is the latest recevied telemetry packets stored in our database for station/object YC1SDZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | Satellite* | Value5* |
|---|---|---|---|---|---|
| 1773888930 | 33 °C | 44 %RH | 1004 hPa | 9 Sat | 0 |
| 1773887030 | 32 °C | 47 %RH | 1004 hPa | 9 Sat | 0 |
| 1773885131 | 32 °C | 49 %RH | 1004 hPa | 9 Sat | 0 |
| 1773883230 | 32 °C | 47 %RH | 1004 hPa | 8 Sat | 0 |
| 1773881332 | 32 °C | 48 %RH | 1004 hPa | 10 Sat | 0 |
| 1773880211 | 31 °C | 48 %RH | 1003 hPa | 7 Sat | 0 |
| 1773878311 | 31 °C | 51 %RH | 1003 hPa | 9 Sat | 0 |
| 1773876411 | 31 °C | 52 %RH | 1003 hPa | 11 Sat | 0 |
| 1773874512 | 32 °C | 51 %RH | 1003 hPa | 9 Sat | 0 |
| 1773872611 | 31 °C | 51 %RH | 1003 hPa | 9 Sat | 0 |
| 1773870711 | 32 °C | 51 %RH | 1002 hPa | 9 Sat | 0 |
| 1773868812 | 31 °C | 51 %RH | 1002 hPa | 9 Sat | 0 |
| 1773866912 | 32 °C | 49 %RH | 1002 hPa | 10 Sat | 0 |
| 1773865012 | 32 °C | 49 %RH | 1002 hPa | 10 Sat | 0 |
| 1773863112 | 32 °C | 49 %RH | 1003 hPa | 10 Sat | 0 |
| 1773861213 | 32 °C | 49 %RH | 1003 hPa | 12 Sat | 0 |
| 1773859312 | 32 °C | 48 %RH | 1003 hPa | 10 Sat | 0 |
| 1773857412 | 32 °C | 47 %RH | 1003 hPa | 10 Sat | 0 |
| 1773855513 | 31 °C | 48 %RH | 1003 hPa | 10 Sat | 0 |
| 1773853614 | 32 °C | 49 %RH | 1003 hPa | 10 Sat | 0 |
| 1773851713 | 32 °C | 50 %RH | 1003 hPa | 10 Sat | 0 |
| 1773849814 | 32 °C | 51 %RH | 1004 hPa | 10 Sat | 0 |
| 1773847912 | 32 °C | 51 %RH | 1004 hPa | 9 Sat | 0 |
| 1773846013 | 33 °C | 48 %RH | 1004 hPa | 9 Sat | 0 |
| 1773844113 | 33 °C | 48 %RH | 1004 hPa | 8 Sat | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Satellite: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)