This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1790318982 | 341 Count | 667 Count | 189 Count | 0 VDC | 0.08 VDC |
| 1790315370 | 333 Count | 655 Count | 185 Count | 0 VDC | 0.08 VDC |
| 1790313565 | 329 Count | 650 Count | 183 Count | 0 VDC | 0.08 VDC |
| 1790312661 | 327 Count | 648 Count | 182 Count | 0 VDC | 0.08 VDC |
| 1790310854 | 323 Count | 645 Count | 180 Count | 0 VDC | 0.08 VDC |
| 1790309048 | 319 Count | 639 Count | 178 Count | 0 VDC | 0.08 VDC |
| 1790308146 | 318 Count | 638 Count | 178 Count | 0 VDC | 0.08 VDC |
| 1790306339 | 314 Count | 631 Count | 176 Count | 0 VDC | 0.08 VDC |
| 1790305436 | 312 Count | 628 Count | 175 Count | 0 VDC | 0.08 VDC |
| 1790304533 | 310 Count | 625 Count | 174 Count | 0 VDC | 0.08 VDC |
| 1790303630 | 308 Count | 622 Count | 173 Count | 0 VDC | 0.08 VDC |
| 1790302727 | 306 Count | 619 Count | 172 Count | 0 VDC | 0.08 VDC |
| 1790301824 | 304 Count | 615 Count | 171 Count | 0 VDC | 0.08 VDC |
| 1790300089 | 296 Count | 607 Count | 169 Count | 0 VDC | 0.08 VDC |
| 1790299186 | 294 Count | 604 Count | 168 Count | 0 VDC | 0.08 VDC |
| 1790297380 | 290 Count | 597 Count | 166 Count | 0 VDC | 0.08 VDC |
| 1790296477 | 288 Count | 588 Count | 165 Count | 0 VDC | 0.08 VDC |
| 1790295573 | 286 Count | 585 Count | 164 Count | 0 VDC | 0.08 VDC |
| 1790294671 | 284 Count | 581 Count | 163 Count | 0 VDC | 0.08 VDC |
| 1790293767 | 282 Count | 577 Count | 162 Count | 0 VDC | 0.08 VDC |
| 1790292864 | 280 Count | 575 Count | 161 Count | 0 VDC | 0.08 VDC |
| 1790290155 | 274 Count | 566 Count | 158 Count | 0 VDC | 0.08 VDC |
| 1790288349 | 270 Count | 560 Count | 156 Count | 0 VDC | 0.08 VDC |
| 1790287446 | 268 Count | 556 Count | 155 Count | 0 VDC | 0.08 VDC |
| 1790286543 | 266 Count | 552 Count | 154 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)