This is the latest recevied telemetry packets stored in our database for station/object IT9CYW-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770056470 | 26.4 C | 37.6 % | 1015.25 hPa | 0 | 0 |
| 1770055212 | 27.6 C | 35.99 % | 973.88 hPa | 0 | 0 |
| 1770055078 | 28.2 C | 35.34 % | 1016.13 hPa | 0 | 0 |
| 1770054988 | 28.5 C | 35.08 % | 973.88 hPa | 0 | 0 |
| 1770054936 | 28.6 C | 34.57 % | 973.75 hPa | 0 | 0 |
| 1770054370 | 29 C | 34.01 % | 973.88 hPa | 0 | 0 |
| 1770054054 | 29.4 C | 33.79 % | 1012.25 hPa | 0 | 0 |
| 1770053852 | 29.6 C | 33.13 % | 1011.88 hPa | 0 | 0 |
| 1770052971 | 30.2 C | 32.63 % | 1012.13 hPa | 0 | 0 |
| 1770052049 | 31.2 C | 31.71 % | 1008.13 hPa | 0 | 0 |
| 1770051922 | 31.2 C | 31.5 % | 973.63 hPa | 0 | 0 |
| 1770051897 | 31.1 C | 31.65 % | 973.63 hPa | 0 | 0 |
| 1770051177 | 31.7 C | 31.21 % | 973.63 hPa | 0 | 0 |
| 1770051158 | 31.6 C | 30.96 % | 1014.63 hPa | 0 | 0 |
| 1770050964 | 31.7 C | 31.14 % | 1014.75 hPa | 0 | 0 |
| 1770050945 | 31.7 C | 31.08 % | 1016.75 hPa | 0 | 0 |
| 1770050662 | 31.8 C | 30.84 % | 1019.63 hPa | 0 | 0 |
| 1770050640 | 31.8 C | 31.43 % | 1022.38 hPa | 0 | 0 |
| 1770050555 | 31.7 C | 31.16 % | 1031.13 hPa | 0 | 0 |
| 1770050536 | 31.7 C | 31.16 % | 1028.38 hPa | 0 | 0 |
| 1770050143 | 31.6 C | 31.43 % | 1017.88 hPa | 0 | 0 |
| 1770049983 | 31.4 C | 32.16 % | 1017.63 hPa | 0 | 0 |
| 1770049797 | 31.1 C | 32.45 % | 1022.88 hPa | 0 | 0 |
| 1770049733 | 31 C | 33.23 % | 1015.38 hPa | 0 | 0 |
| 1770049346 | 30.2 C | 34.23 % | 1006 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)