This is the latest recevied telemetry packets stored in our database for station/object SP8AA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794333370 | 98 Count | 0 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1794333187 | 97 Count | 0 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1794333004 | 96 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1794332821 | 95 Count | 0 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1794332638 | 94 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1794332455 | 93 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1794332272 | 92 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1794332089 | 91 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1794331907 | 90 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1794331724 | 89 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1794331541 | 88 Count | 0 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1794331358 | 87 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1794331175 | 86 Count | 0 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1794330993 | 85 Count | 0 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1794330810 | 84 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1794330627 | 83 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1794330444 | 82 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1794330261 | 81 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1794330078 | 80 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1794329895 | 79 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1794329712 | 78 Count | 0 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1794329530 | 77 Count | 0 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1794329347 | 76 Count | 0 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1794329164 | 75 Count | 0 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1794328981 | 74 Count | 0 Count | 0 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)