This is the latest recevied telemetry packets stored in our database for station/object SQ6AMD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769822501 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1769821601 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1769820701 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1769819801 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1769818900 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1769818000 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1769817100 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1769816200 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1769815300 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1769814400 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1769813499 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1769812599 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1769811699 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1769810799 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1769809899 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1769808999 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1769808098 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1769807198 | 4.06 VDC | 0 | 0 | 0 | 0 |
| 1769806298 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1769805398 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1769804498 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1769803598 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1769802697 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1769801796 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1769800902 | 4.07 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)