This is the latest recevied telemetry packets stored in our database for station/object IW7BIN-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773726757 | 2.97 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1773726691 | 3 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1773724684 | 3 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1773722658 | 3.01 VDC | 0.74 VDC | 0 | 0 | 0 |
| 1773720829 | 2.98 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1773720583 | 3.02 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1773718668 | 2.98 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773718656 | 2.97 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773717887 | 3.03 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1773714743 | 3 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773712942 | 3.03 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773711142 | 3.05 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773709341 | 3.07 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773707541 | 3.1 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773705741 | 3.11 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1773703941 | 3.14 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1773702141 | 3.15 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1773700340 | 3.17 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1773698542 | 3.19 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1773696743 | 3.21 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1773694942 | 3.23 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1773693142 | 3.26 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1773691341 | 3.31 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1773689541 | 3.36 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1773687741 | 3.4 VDC | 0.72 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)