This is the latest recevied telemetry packets stored in our database for station/object BURNTM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786411681 | 4.26 VDC | 17.4 VDC | 0 | 0 | 0 |
| 1786411082 | 4.27 VDC | 17.78 VDC | 0 | 0 | 0 |
| 1786410481 | 4.27 VDC | 18 VDC | 0 | 0 | 0 |
| 1786409880 | 4.27 VDC | 18.26 VDC | 0 | 0 | 0 |
| 1786409280 | 4.27 VDC | 18.46 VDC | 0 | 0 | 0 |
| 1786408678 | 4.27 VDC | 18.52 VDC | 0 | 0 | 0 |
| 1786408078 | 4.27 VDC | 18.74 VDC | 0 | 0 | 0 |
| 1786407478 | 4.27 VDC | 18.86 VDC | 0 | 0 | 0 |
| 1786406878 | 4.27 VDC | 19.12 VDC | 0 | 0 | 0 |
| 1786406278 | 4.27 VDC | 19.44 VDC | 0 | 0 | 0 |
| 1786405679 | 4.27 VDC | 19.84 VDC | 0 | 0 | 0 |
| 1786405079 | 4.28 VDC | 20.1 VDC | 0 | 0 | 0 |
| 1786404479 | 4.28 VDC | 20.38 VDC | 0 | 0 | 0 |
| 1786403879 | 4.28 VDC | 20.52 VDC | 0 | 0 | 0 |
| 1786403279 | 4.28 VDC | 20.7 VDC | 0 | 0 | 0 |
| 1786402675 | 4.28 VDC | 20.86 VDC | 0 | 0 | 0 |
| 1786402075 | 4.28 VDC | 21.02 VDC | 0 | 0 | 0 |
| 1786401475 | 4.28 VDC | 20.8 VDC | 0 | 0 | 0 |
| 1786400877 | 4.28 VDC | 20.74 VDC | 0 | 0 | 0 |
| 1786400277 | 4.28 VDC | 21.16 VDC | 0 | 0 | 0 |
| 1786399673 | 4.28 VDC | 21.18 VDC | 0 | 0 | 0 |
| 1786399076 | 4.28 VDC | 21.18 VDC | 0 | 0 | 0 |
| 1786398472 | 4.28 VDC | 21.04 VDC | 0 | 0 | 0 |
| 1786397876 | 4.28 VDC | 21.28 VDC | 0 | 0 | 0 |
| 1786397272 | 4.29 VDC | 21.3 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)