This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786413841 | 35.4 C | 32.07 % | 1024.5 hPa | 0 | 0 |
| 1786401363 | 35.6 C | 33.54 % | 1022.75 hPa | 0 | 0 |
| 1786392333 | 35.8 C | 31.71 % | 1023.63 hPa | 0 | 0 |
| 1786386828 | 36.3 C | 28.58 % | 1021.5 hPa | 0 | 0 |
| 1786386555 | 36.3 C | 26.58 % | 1019.38 hPa | 0 | 0 |
| 1786386265 | 36.7 C | 28.02 % | 1022 hPa | 0 | 0 |
| 1786377805 | 38 C | 21.36 % | 1020.38 hPa | 0 | 0 |
| 1786368775 | 37.2 C | 19.14 % | 1022.63 hPa | 0 | 0 |
| 1786359745 | 37 C | 21.38 % | 1023.38 hPa | 0 | 0 |
| 1786353362 | 41.8 C | 20.97 % | 1023 hPa | 0 | 0 |
| 1786353097 | 38.6 C | 27.1 % | 1023.38 hPa | 0 | 0 |
| 1786350463 | 34.3 C | 32.41 % | 1024.88 hPa | 0 | 0 |
| 1786341433 | 33.5 C | 36.11 % | 1025.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)