This is the latest recevied telemetry packets stored in our database for station/object CAVECR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773534245 | 4.26 VDC | 22.14 VDC | 0 | 0 | 0 |
| 1773533645 | 4.26 VDC | 22.26 VDC | 0 | 0 | 0 |
| 1773533044 | 4.27 VDC | 22.26 VDC | 0 | 0 | 0 |
| 1773532444 | 4.27 VDC | 22.3 VDC | 0 | 0 | 0 |
| 1773531843 | 4.27 VDC | 22.2 VDC | 0 | 0 | 0 |
| 1773531243 | 4.27 VDC | 22.26 VDC | 0 | 0 | 0 |
| 1773530642 | 4.27 VDC | 22.36 VDC | 0 | 0 | 0 |
| 1773530041 | 4.27 VDC | 22.38 VDC | 0 | 0 | 0 |
| 1773529439 | 4.27 VDC | 22.34 VDC | 0 | 0 | 0 |
| 1773528838 | 4.27 VDC | 22.24 VDC | 0 | 0 | 0 |
| 1773528237 | 4.27 VDC | 22 VDC | 0 | 0 | 0 |
| 1773527637 | 4.27 VDC | 22.32 VDC | 0 | 0 | 0 |
| 1773527037 | 4.27 VDC | 22.38 VDC | 0 | 0 | 0 |
| 1773526436 | 4.27 VDC | 22.08 VDC | 0 | 0 | 0 |
| 1773525842 | 4.27 VDC | 22.2 VDC | 0 | 0 | 0 |
| 1773525233 | 4.27 VDC | 21.98 VDC | 0 | 0 | 0 |
| 1773524633 | 4.28 VDC | 21.88 VDC | 0 | 0 | 0 |
| 1773524033 | 4.28 VDC | 21.98 VDC | 0 | 0 | 0 |
| 1773523433 | 4.28 VDC | 22.16 VDC | 0 | 0 | 0 |
| 1773522833 | 4.28 VDC | 22.1 VDC | 0 | 0 | 0 |
| 1773522233 | 4.28 VDC | 21.8 VDC | 0 | 0 | 0 |
| 1773521635 | 4.29 VDC | 22.1 VDC | 0 | 0 | 0 |
| 1773521031 | 4.28 VDC | 21.86 VDC | 0 | 0 | 0 |
| 1773520431 | 4.29 VDC | 22.38 VDC | 0 | 0 | 0 |
| 1773519831 | 4.29 VDC | 22.26 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)