This is the latest recevied telemetry packets stored in our database for station/object SP6RSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769999228 | 437 Count | 909 Count | 224 Count | 4.07 VDC | 0 VDC |
| 1769998927 | 435 Count | 905 Count | 223 Count | 4.07 VDC | 0 VDC |
| 1769998626 | 433 Count | 902 Count | 222 Count | 4.07 VDC | 0 VDC |
| 1769998325 | 429 Count | 896 Count | 220 Count | 4.08 VDC | 0 VDC |
| 1769998025 | 427 Count | 891 Count | 219 Count | 4.09 VDC | 0 VDC |
| 1769997724 | 424 Count | 884 Count | 217 Count | 4.07 VDC | 0 VDC |
| 1769997477 | 420 Count | 878 Count | 215 Count | 4.07 VDC | 0 VDC |
| 1769997177 | 418 Count | 875 Count | 214 Count | 4.07 VDC | 0 VDC |
| 1769996876 | 416 Count | 871 Count | 213 Count | 4.06 VDC | 0 VDC |
| 1769996575 | 412 Count | 869 Count | 211 Count | 4.07 VDC | 0 VDC |
| 1769996275 | 409 Count | 862 Count | 209 Count | 4.08 VDC | 0 VDC |
| 1769995974 | 407 Count | 860 Count | 208 Count | 4.07 VDC | 0 VDC |
| 1769995673 | 403 Count | 856 Count | 206 Count | 4.07 VDC | 0 VDC |
| 1769995372 | 401 Count | 851 Count | 205 Count | 4.07 VDC | 0 VDC |
| 1769995072 | 398 Count | 846 Count | 203 Count | 4.07 VDC | 0 VDC |
| 1769994771 | 394 Count | 841 Count | 201 Count | 4.08 VDC | 0 VDC |
| 1769994470 | 392 Count | 835 Count | 200 Count | 4.07 VDC | 0 VDC |
| 1769994169 | 390 Count | 832 Count | 199 Count | 4.08 VDC | 0 VDC |
| 1769993869 | 385 Count | 823 Count | 196 Count | 4.08 VDC | 0 VDC |
| 1769993568 | 383 Count | 818 Count | 195 Count | 4.07 VDC | 0 VDC |
| 1769993267 | 381 Count | 815 Count | 194 Count | 4.09 VDC | 0 VDC |
| 1769992967 | 377 Count | 810 Count | 192 Count | 4.07 VDC | 0 VDC |
| 1769992666 | 374 Count | 804 Count | 190 Count | 4.07 VDC | 0 VDC |
| 1769992365 | 372 Count | 802 Count | 189 Count | 4.07 VDC | 0 VDC |
| 1769992064 | 368 Count | 797 Count | 187 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)