This is the latest recevied telemetry packets stored in our database for station/object SP6ZWR-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786410095 | 25.5 C | 26.22 % | 1021 hPa | 0 | 0 |
| 1786409194 | 25.8 C | 26.22 % | 1019.25 hPa | 0 | 0 |
| 1786408293 | 26.1 C | 25.65 % | 1015.38 hPa | 0 | 0 |
| 1786407392 | 26.4 C | 25.57 % | 1019.63 hPa | 0 | 0 |
| 1786406491 | 26.6 C | 25.33 % | 1018.63 hPa | 0 | 0 |
| 1786405590 | 27 C | 24.76 % | 1019.5 hPa | 0 | 0 |
| 1786404689 | 27.3 C | 24.27 % | 1017.13 hPa | 0 | 0 |
| 1786402887 | 27.9 C | 23.81 % | 1023.88 hPa | 0 | 0 |
| 1786401986 | 28.3 C | 23.23 % | 1018.75 hPa | 0 | 0 |
| 1786401085 | 28.7 C | 22.68 % | 1017.5 hPa | 0 | 0 |
| 1786400184 | 29.3 C | 22.18 % | 1018.13 hPa | 0 | 0 |
| 1786399283 | 30 C | 21.77 % | 1018 hPa | 0 | 0 |
| 1786398382 | 30.6 C | 20.58 % | 1017.25 hPa | 0 | 0 |
| 1786397481 | 30.9 C | 20.35 % | 1018.25 hPa | 0 | 0 |
| 1786396580 | 31.2 C | 20.8 % | 1017.13 hPa | 0 | 0 |
| 1786395679 | 31.6 C | 20.51 % | 1015.88 hPa | 0 | 0 |
| 1786394779 | 31.9 C | 20.41 % | 1016.38 hPa | 0 | 0 |
| 1786393877 | 32.2 C | 19.83 % | 1014.5 hPa | 0 | 0 |
| 1786392976 | 32.4 C | 19.57 % | 1013.13 hPa | 0 | 0 |
| 1786392075 | 32.5 C | 19.18 % | 1014.13 hPa | 0 | 0 |
| 1786391174 | 32.6 C | 19.24 % | 1014.75 hPa | 0 | 0 |
| 1786390273 | 32.6 C | 18.2 % | 1016 hPa | 0 | 0 |
| 1786389372 | 32.6 C | 18 % | 1014.38 hPa | 0 | 0 |
| 1786388471 | 32.6 C | 17.8 % | 1014.5 hPa | 0 | 0 |
| 1786387570 | 32.9 C | 16.24 % | 1013.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)