This is the latest recevied telemetry packets stored in our database for station/object F5UGQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773769351 | 110 Count | 215 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773767548 | 109 Count | 215 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1773765746 | 108 Count | 215 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773763943 | 107 Count | 215 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773762140 | 106 Count | 215 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773760337 | 105 Count | 215 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1773758534 | 104 Count | 215 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1773756765 | 103 Count | 215 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1773754962 | 102 Count | 212 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1773753159 | 101 Count | 209 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1773751356 | 100 Count | 206 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1773749553 | 99 Count | 203 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1773747751 | 98 Count | 200 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1773745947 | 97 Count | 198 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773744144 | 96 Count | 195 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1773742341 | 95 Count | 192 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1773740539 | 94 Count | 189 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773738736 | 93 Count | 187 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1773736933 | 92 Count | 184 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1773735163 | 91 Count | 182 Count | 0 Count | 4.28 VDC | 0.14 VDC |
| 1773733360 | 90 Count | 181 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1773731557 | 89 Count | 177 Count | 0 Count | 4.3 VDC | 0.14 VDC |
| 1773729754 | 88 Count | 174 Count | 0 Count | 4.19 VDC | 0.14 VDC |
| 1773727952 | 87 Count | 170 Count | 0 Count | 4.23 VDC | 0.14 VDC |
| 1773726149 | 86 Count | 169 Count | 0 Count | 4.24 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)