This is the latest recevied telemetry packets stored in our database for station/object EA4EJV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782581662 | 35 C | 1027.5 hPa | 0 | 0 | 0 |
| 1782581411 | 32.7 C | 1026.75 hPa | 0 | 0 | 0 |
| 1782580052 | 34.4 C | 1023.75 hPa | 0 | 0 | 0 |
| 1782579837 | 34.6 C | 1023.38 hPa | 0 | 0 | 0 |
| 1782579370 | 34.1 C | 1024.13 hPa | 0 | 0 | 0 |
| 1782577916 | 36.6 C | 1027.63 hPa | 0 | 0 | 0 |
| 1782577690 | 36.4 C | 1024.13 hPa | 0 | 0 | 0 |
| 1782577378 | 35.1 C | 1027.25 hPa | 0 | 0 | 0 |
| 1782575929 | 30.1 C | 1034.75 hPa | 0 | 0 | 0 |
| 1782575752 | 30.5 C | 1032.88 hPa | 0 | 0 | 0 |
| 1782574638 | 31.8 C | 1030.25 hPa | 0 | 0 | 0 |
| 1782572508 | 33.8 C | 1025.88 hPa | 0 | 0 | 0 |
| 1782572211 | 36 C | 1024.75 hPa | 0 | 0 | 0 |
| 1782571957 | 37.8 C | 1027.63 hPa | 0 | 0 | 0 |
| 1782571595 | 36.9 C | 1027.88 hPa | 0 | 0 | 0 |
| 1782570912 | 37.8 C | 1031 hPa | 0 | 0 | 0 |
| 1782570630 | 37.4 C | 1027.38 hPa | 0 | 0 | 0 |
| 1782569552 | 36.2 C | 1027.25 hPa | 0 | 0 | 0 |
| 1782564944 | 39 C | 1022.63 hPa | 0 | 0 | 0 |
| 1782564524 | 41.8 C | 1024.25 hPa | 0 | 0 | 0 |
| 1782562860 | 51.3 C | 1022.13 hPa | 0 | 0 | 0 |
| 1782562584 | 53.9 C | 1020.5 hPa | 0 | 0 | 0 |
| 1782562195 | 58 C | 1021.88 hPa | 0 | 0 | 0 |
| 1782558724 | 35.6 C | 1021.63 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)