This is the latest recevied telemetry packets stored in our database for station/object SR8NZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773763828 | 942 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763767 | 941 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763707 | 940 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763646 | 939 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763585 | 938 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763524 | 937 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763464 | 936 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763403 | 935 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763341 | 934 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763281 | 933 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763220 | 932 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763159 | 931 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763098 | 930 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773763038 | 929 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762977 | 928 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762916 | 927 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762855 | 926 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762795 | 925 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762734 | 924 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762673 | 923 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762613 | 922 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762552 | 921 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762491 | 920 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762430 | 919 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1773762370 | 918 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)