This is the latest recevied telemetry packets stored in our database for station/object 9W2RDY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766029572 | 0.28 VDC | 9.48 VDC | 0 | 0 | 0 |
| 1766028963 | 0.28 VDC | 9.24 VDC | 0 | 0 | 0 |
| 1766028486 | 0.28 VDC | 8.98 VDC | 0 | 0 | 0 |
| 1766026836 | 0.28 VDC | 9.08 VDC | 0 | 0 | 0 |
| 1766025936 | 0.28 VDC | 9.1 VDC | 0 | 0 | 0 |
| 1766025036 | 0.28 VDC | 9.18 VDC | 0 | 0 | 0 |
| 1766024120 | 0.28 VDC | 9.2 VDC | 0 | 0 | 0 |
| 1766023220 | 0.28 VDC | 9.28 VDC | 0 | 0 | 0 |
| 1766022320 | 0.28 VDC | 9.24 VDC | 0 | 0 | 0 |
| 1766021419 | 0.28 VDC | 9.26 VDC | 0 | 0 | 0 |
| 1766020519 | 0.28 VDC | 9.28 VDC | 0 | 0 | 0 |
| 1766019619 | 0.28 VDC | 9.28 VDC | 0 | 0 | 0 |
| 1766018719 | 0.28 VDC | 9.34 VDC | 0 | 0 | 0 |
| 1766017819 | 0.28 VDC | 9.3 VDC | 0 | 0 | 0 |
| 1766016919 | 0.28 VDC | 9.3 VDC | 0 | 0 | 0 |
| 1766016018 | 0.28 VDC | 9.3 VDC | 0 | 0 | 0 |
| 1766015118 | 0.28 VDC | 9.32 VDC | 0 | 0 | 0 |
| 1766014218 | 0.28 VDC | 9.34 VDC | 0 | 0 | 0 |
| 1766013318 | 0.28 VDC | 9.36 VDC | 0 | 0 | 0 |
| 1766012418 | 0.28 VDC | 9.46 VDC | 0 | 0 | 0 |
| 1766011518 | 0.28 VDC | 9.4 VDC | 0 | 0 | 0 |
| 1766010618 | 0.28 VDC | 9.42 VDC | 0 | 0 | 0 |
| 1766009719 | 0.28 VDC | 9.46 VDC | 0 | 0 | 0 |
| 1766008817 | 0.28 VDC | 9.5 VDC | 0 | 0 | 0 |
| 1766007911 | 0.28 VDC | 9.72 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)