This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1786509679 | 119 Count | 106 Count | 84 Count | 3.83 VDC | 0.14 VDC |
| 1786506074 | 118 Count | 106 Count | 84 Count | 3.86 VDC | 0.14 VDC |
| 1786502469 | 117 Count | 106 Count | 84 Count | 3.85 VDC | 0.14 VDC |
| 1786498864 | 116 Count | 106 Count | 84 Count | 3.87 VDC | 0.14 VDC |
| 1786495258 | 115 Count | 106 Count | 84 Count | 3.87 VDC | 0.14 VDC |
| 1786488077 | 113 Count | 106 Count | 84 Count | 3.87 VDC | 0.14 VDC |
| 1786484472 | 112 Count | 106 Count | 84 Count | 3.9 VDC | 0.14 VDC |
| 1786480867 | 111 Count | 106 Count | 84 Count | 3.9 VDC | 0.14 VDC |
| 1786477261 | 110 Count | 106 Count | 84 Count | 3.91 VDC | 0.14 VDC |
| 1786473659 | 108 Count | 105 Count | 83 Count | 3.92 VDC | 0.14 VDC |
| 1786470050 | 90 Count | 88 Count | 66 Count | 3.92 VDC | 0.14 VDC |
| 1786466476 | 83 Count | 82 Count | 60 Count | 3.94 VDC | 0.14 VDC |
| 1786462871 | 81 Count | 81 Count | 59 Count | 3.95 VDC | 0.14 VDC |
| 1786459266 | 80 Count | 81 Count | 59 Count | 3.96 VDC | 0.14 VDC |
| 1786455660 | 79 Count | 81 Count | 59 Count | 3.97 VDC | 0.14 VDC |
| 1786452055 | 78 Count | 73 Count | 59 Count | 3.99 VDC | 0.14 VDC |
| 1786448450 | 77 Count | 70 Count | 59 Count | 4 VDC | 0.14 VDC |
| 1786441275 | 69 Count | 64 Count | 53 Count | 3.98 VDC | 0.14 VDC |
| 1786437668 | 68 Count | 64 Count | 53 Count | 3.94 VDC | 0.14 VDC |
| 1786434063 | 66 Count | 62 Count | 52 Count | 3.91 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)