PenangAPRS Track

My position About ☰

reset

HS4IOO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4IOO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR*	BAT*
1769784510	34.27 °C	42.1 %RH	1007.3 hPa	4.14 V
1769783910	34.59 °C	40.9 %RH	1007.2 hPa	4.18 V
1769783310	34.5 °C	40.3 %RH	1007.1 hPa	4.19 V
1769782710	34.38 °C	40.4 %RH	1007.1 hPa	4.19 V
1769782110	34.65 °C	39.7 %RH	1007.1 hPa	4.18 V
1769781510	34.72 °C	38.9 %RH	1006.9 hPa	4.19 V
1769780910	34.84 °C	38.7 %RH	1006.8 hPa	4.18 V
1769780310	34.63 °C	39.1 %RH	1006.8 hPa	4.18 V
1769779710	34.72 °C	39 %RH	1006.7 hPa	4.18 V
1769779110	34.27 °C	40.1 %RH	1006.5 hPa	4.18 V
1769778510	34.18 °C	40.4 %RH	1006.2 hPa	4.11 V
1769777910	34.66 °C	40.3 %RH	1006 hPa	4.12 V
1769777310	35 °C	39.8 %RH	1005.9 hPa	4.18 V
1769776710	35.08 °C	39.4 %RH	1005.8 hPa	4.18 V
1769776110	35.27 °C	39.1 %RH	1005.7 hPa	4.18 V
1769775510	35.29 °C	39.4 %RH	1005.5 hPa	4.19 V
1769774911	35.36 °C	39 %RH	1005.5 hPa	4.19 V
1769774310	35.5 °C	38.7 %RH	1005.4 hPa	4.18 V
1769773709	35.59 °C	38.7 %RH	1005.2 hPa	4.19 V
1769773109	35.86 °C	37.7 %RH	1005.2 hPa	4.18 V
1769772509	35.56 °C	37 %RH	1005.1 hPa	4.17 V
1769771909	35.72 °C	34.4 %RH	1005 hPa	4.11 V
1769771309	35.56 °C	33 %RH	1004.9 hPa	4.12 V
1769770709	36.49 °C	31.8 %RH	1004.8 hPa	4.19 V
1769770109	36.38 °C	31.9 %RH	1004.7 hPa	4.19 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR: 0, 0.1, 800

BAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)